Pelican Pool & Spa Hoist Measuring Guide

IMPORTANT NOTICE: WATER DEPTH

In accordance with the Disabilities Standards Code, Disability (Access to Premises – Buildings) Standards 2010 Part D5, the Pelican base rim must be positioned on the pool or spa surrounds where the water depth is not less than 500mm and not more than 1300mm.

Pool Profiles

Please note which profile best matches your pool – you will be asked to select this in the form below along with supplying the measurements.

Colour options

Pelican Pool & Spa Hoist Measurement Form

Pelican Pool & Spa Hoist Measuring Guide

Name

Phone

Install Address

Address

Suburb

State

Postcode

Water depth at the point of entry (ie Pelican location)

Max 1300mm

Do you have the minimum concrete width & thickness to mount the hoist on pool deck?

Yes

TO SAFELY INSTALL the Pelican Pool & Spa Hoist you will need a FLAT AND LEVEL SOLID CONCRETE PAD to anchor it to. We recommend a minimum ⅓ of cubic metre of concrete is used when pouring your pad. This can be made up as a logical size, for example: 1000mm x 1000mm x 300mm but at a minimum must have a surface area of at least 650mm x 650mm & minimum depth of 100mm. The ideal location is placed up against the pool edge.

Which Dulux colour would you like?

Refer to colour swatches at the top of the page.