THE FREEDOM TO

change

ParaMobility

POWERED WALL MOUNTED HEIGHT ADJUSTABLE CHANGE TABLE


Designed and manufactured by Para Mobility the POWER Wall Mounted Height Adjustable Change Table can be used in schools, private homes, community centres, swimming pool change rooms and leisure centres. The POWER Wall Mounted Height Adjustable Change Table has been designed to be stored flat against the wall within its own frame when not in use, creating extra space. When ready for use, the table is easily lowered to the desired height with the hand control – even low enough for a person to slide transfer from a wheelchair!

Features

  • Lightweight aluminium construction – powder coated white.
  • Table top and surrounding cushions are covered in Medi-Flex for stain minimisation. Mediflex is a flame resis tant fabric which is slip resistant, waterproof, dust mite, urine and stain resistant with an anti bacterial additive.
  • Height adjustable - with or without a person on it (600mm range).
  • Twin Linak actuators and hand control.
  • Fitted with one (1) lap restraint strap for safety. Additional strapping can be added if necessary.
  • Easily retro-fitted to any masonry or timber stud wall.
  • 600mm lift range.

Specifications

  • Manufactured by Para Mobility in accordance with ASA 3581 standards, with lightweight aluminium frame
  • Can be mounted on masonry or timber stud walls, full installation instructions are supplied on delivery.
  • Standard bed size:1850mm long x 750mm wide; sizes can be tailor made to user requirements. SWL - 200kg
  • NB: Allow 125mm on either side of bed for frame when measuring available space

Download product information sheet (PDF)

WALL MOUNTED HEIGHT ADJUSTABLE CHANGE TABLE


Enjoy greater opportunities out and about!

Australian designed and manufactured by Para Mobility, the Wall Mounted Height Adjustable Change Table can be used in schools, private homes, community centres, swimming pool change rooms, leisure centres, entertainment facilities, shopping centres, residential aged care homes and disability accommodation.

The Wall Mounted Height Adjustable Change Table has been designed to be stored flat against the wall within its own frame when not in use, creating extra space. When ready for use, the table is easily lowered to the desired height with no power required for operation, ensuring less manual handling strain for the carer and participant.

Features

  • Lightweight aluminium construction.
  • Hook and Loop tape secured cushions to ensure safety.
  • Table top and surrounding cushions are covered in Medi-Flex for stain resistance. Medi-Flex is a flame retardant fabric which is waterproof, dust mite, urine, stain and slip resistant with an antibacterial additive.
  • Three (3) height positions 75mm apart with easy adjustment.
  • Fitted with one (1) restraint strap for safety. Additional strapping can be added if necessary.
  • Manufactured by Para Mobility in accordance with ASA 3581 standards, with lightweight aluminium frame.
  • Can be fixed to most walls including brick and stud walls, full installation instructions are supplied on delivery.

Measurements

  • Recommended installation height: 600mm from floor to frame.
  • Standard bed size: 1850mm long x 750mm wide; sizes can be tailor made to user requirements. SWL - 120kg.
  • Small bed size: 1200m long x 750mm wide. SWL - 80kg.
  • NB - an additional 63mm each side needs to be added to accommodate the frame when checking available space.

Download product information sheet (PDF)

MOBILE HEIGHT ADJUSTABLE CHANGE TABLE


 

Designed and manufactured by Para Mobility (Australian owned and operated), the mobile height adjustable change table allows easy transfer from a wheel chair when the table top is at its lowest point. The table can then be raised to a working height for the carer. The table top is removable and can be tailor made to suit the dimensions of the room and the user.

NB: Care should be taken in a wet environment.

Features

  • Lowers to allow a person to slide transfer or use a floor lifter from a wheelchair to the table top.
  • Hand held control for easy operation.
  • Restraint strap included.
  • Stainless steel shelf.
  • Table top can be easily removed for easy storage, transport or fitting into tight areas.
  • Top is padded and covered with high grade PVC material for urine and stain control.
  • Unit is on castors with 2 locking wheels.
  • Framework is galvanised and powder coated for corrosion resistance.
  • Used for washing and changing in either a wet or dry area.

Specifications

  • Standard table top size: 1850mm long x 700mm wide. Sizes can be made to suit the user.
  • Rises to approximately 880mm.
  • Lowest point – approximately 480mm.
  • Has clearance of 150mm at bottom allowing floor hoist to fit underneath.
  • SWL (safe working load) 200kg.

Optional Extras

  • Drop down sides 150mm standard height x 1200 long. Sides can be made to order.
  • Battery power pack - allowing for use without been plugged into a power point.
  • Additional straps.
  • Foot Pedal operation.

Download Product Information Sheet (PDF)

PLATYPUS MOBILE CHANGE TABLE


Platypus Products Australia has designed this change table as a lightweight alternative to standard change tables. The unique design allows a person to be changed in any area (wet or dry) whilst being completely mobile .

Features

  • Sturdy frame
  • 700mm (wide) x 1700mm (long) x 800mm (high)
  • Stainless steel castors (2 lockable)
  • SWL 80kg
  • Accidental burns are prevented as plastic does not absorb the heat
  • Open weave fabric which allows the easy passage of air and water
  • Easy to dry and clean
  • Rounded surfaces which improve comfort and reduce s the risk of skin tears

Optional Accessories

  • Safety Belt/s
  • Raised Head
  • Storage area

Download Product Information Sheet (PDF)


VIEW + DOWNLOAD OUR PRODUCT BROCHURE